色睛网站免费

The T-600Y fully automatic edge banding machine is a device used for edge banding of boards in the woodworking industry. It features comprehensive functions, high precision and high efficiency, and is widely applied in the manufacturing of furniture such as whole-house customization and wardrobes and cabinets. The following is the specific introduction:

Main functions

Pre-milling: Before edge banding, the edges of the sheet are milled to remove surface unevenness and residues, making the edges of the sheet smooth and providing a better bonding surface for the edge banding material.

Gluing: Apply an appropriate amount of glue evenly to the edges of the board and the edge banding material to ensure a strong bond is formed between them.

After the edge banding material is adhered to the board, the excess parts at both ends are cut off to ensure that the edges of the board after edge banding are neat and the dimensions are precise.

Rough finishing and fine finishing: The rough finishing function removes the excess part of the edge banding material and initially trims the edge. Fine finishing further refines the edges to make them smoother, free of burrs or protrusions.

Edge scraping: Remove the fine marks or glue residues that may occur during the trimming process, make minor adjustments to the edges, and improve the quality of edge banding.

Polishing: Polish the edges after edge banding to make them smooth and shiny, enhancing the aesthetic appeal of the furniture.

Performance parameters

The processing range of sheet materials: The thickness of the sheet materials that can be processed is generally between 10 and 60mm. The minimum processing width of the sheet materials is greater than 80mm, and the minimum processing length is greater than 160mm. It can meet the edge banding requirements of various specifications of sheet materials.

The application scope of edge banding: Generally, edge banding with a thickness of 0.4 to 3mm can be used. The width of the edge banding varies depending on the specific model, usually ranging from 12 to 50mm. It can be adapted to edge banding made of various materials such as PVC, acrylic, and solid wood veneer.

Feeding speed: The feeding speed is usually between 12 and 24m/min. The specific speed can be adjusted according to processing requirements. A higher feeding speed helps to improve production efficiency.

Power and voltage: The total power is generally around 7-18KW, and the voltage is mostly 380V. The specific values may vary depending on different manufacturers and models.

Overall dimensions and weight: The overall dimensions are relatively large, typically around 4700mm in length, 900mm in width, and 1600mm in height. The overall weight of the machine is approximately 1800kg, and it requires a certain amount of installation space.

Equipment features

The control system is advanced: Some models adopt Delta PLC and frequency converters from Taiwan, combined with high-precision encoders, to ensure the stability of the edge banding machine's operation and the accuracy of edge banding.

High-quality key components: Key components such as cylinders, linear guides, and limit switches are selected from well-known brand products, such as Taiwan Airtac cylinders, ensuring reliable equipment performance and a long service life.

The structure design is reasonable: It has an independent lifting system and is simple and convenient to operate. Some models are also equipped with an optional glue spray cleaning system, which helps remove glue and dirt from the boards during the edge banding process.